A tractor does much heavy work in the paddock, but it cannot function effectively on public roads. Due to its weight and speed, it needs to be carried using an appropriate trailer. This guest post walks you through this process and what Nextload Australia has to offer.
- Why You Shouldn’t Attempt to Drive It Yourself
The authorities limit the use of tractors on the highways, and it is confined to very short, essential journeys only. Low speeds cause delays in traffic, and you will be making a mistake with your tyres, gearbox, and engine hours.
- Choosing the Right Trailer
Much like with the carrier, you should look into what trailer will be best for your needs:
- Flatbed – Suitable for smaller tractors that can be loaded from the dock/platform/forklift.
- Detachable Gooseneck – Reaches the ground level and forms a ramp for large and heavy tractors.
- Step Deck – Provides more room for taller tractors. Extra room is also provided so extra units can be fitted onto the top deck.
- Shipping Container – Protects the tractor from any weather conditions. This can be useful when transporting by sea.
Large and high-horsepower machines often fall into heavy haulage transport, so it is vital to speak to operators from the start.
- Know the Rules Before You Hire
There are different rules for each state, and you have to look at each one your route will travel through. The permits are typically required for oversize and overweight shipments, and shipments that are extra wide or long could require a pilot vehicle or an escort vehicle. Overhead power lines may require authorization from the local power company. A skilled operator handles most of this paperwork, which makes experience a key factor in heavy haulage transport.
- Clean Your Machine
Biosecurity regulations surprise most people. If soil and seed from a tractor can carry pests and weeds, clean your machine properly before heavy haulage transport. Some areas, like Western Australia, require quarantine-level cleaning, and you may be inspected by roadside inspectors. Take your health certificates if your state asks for them.
- Preparation for Loading
Proper loading is always started on the ground. The following are a few tips:
- Check tyres, lights, brakes, and tie-downs of the trailer.
- Ensure that the load is taken on to firm ground without oil, mud, or water at the ramp.
- Assign responsibilities to all concerned – driver, spotter, and chain checker.
- Exclude all spectators and other vehicles.
- Drive slowly and steadily with the weight of the tractor at the front part of the trailer.
- Safe Loading
Use appropriate straps and chains for the weight of the load. Secure in the corners of the vehicle. Make sure that chains are secured so there will be no movement during shipping. Ensure that the tie downs used won’t cause any damage to the hoses and engine parts. Chock the wheels and apply the parking brake. The tractor should be in gear.
- Inspect the Insurance
Find out whether the operator is insured for your truck.
- If you are transporting goods for less than 100 miles, a full day is enough.
- If you are transporting goods across states, you will need at least three full days.
- Add another day to be safe during harvest season and make bookings early to avoid rush costs.
- Why Choose Nextload Australia
Nextload Australia uses a digital freight platform allowing tractor owners to go directly to operators. This means that farmers, dealers and equipment owners can have their small, utility and large farm tractors transported to their destination along with attachments and farm machinery. All tractors made by manufacturers such as John Deere, Kubota, Case IH, New Holland, Massey Ferguson and Fendt are transportable.
If you have bought a tractor from a dealer or auction in another state, offer the transport job and choose from operators who can provide tractor transport within your local area and interstate. Some operators will be able to transport multiple units based on trailer availability and route.
This freight network can also be used for machinery and heavy haulage transport. This means you can transport your loaders and harvesters.
- What to Share with Operators
Accurate information means accurate quotes. Please prepare this information:
- Tractor manufacturer, model, and type
- Length, width, height, and weight
- Running status, as non-running equipment requires different loading techniques
- Any attachments to be shipped
- Pick-up and delivery locations
- Your deadline
Quote price will depend on the equipment’s dimensions, weight, distance, permits needed, and loading requirements. This information is crucial in forming any tractor transport quote. Share your requirements on Nextload Australia, then compare the responses and pick the operator that matches your criteria.
Final Thoughts
Selecting the right trailer, abiding by regulations and using an experienced operator will allow for proper transport of your equipment. Whether you need to transport a small-sized tractor or heavy machinery requiring heavy haulage transport, Nextload Australia will be able to find you the right operator. Submit your request today.